📌 Why ATV Wheel Alignment Matters

Misaligned front wheels lead to:

• 🛞 Inconsistent or loose steering
• 📉 Reduced fuel efficiency (on-road utility ATVs)
• 🔧 Faster wear on steering and suspension components
• ❗ Higher risk of control loss at speed or on rough terrain

Even a 1–2 mm misalignment can impact stability and safety. Aligning your ATV wheels is a cost-effective maintenance task you can often do yourself.

🧰 Tools You’ll Need

• Tape measure (metric preferred)
• Marker or chalk
• Flat, level surface
• Adjustable wrench or socket set
• Jack and wheel chocks
• Straight edge or string (optional)

🛠️ How to Align ATV Front Wheels

Step 1: Set the Tires on a Level Surface

Ensure the ATV is on a flat surface with tires inflated to correct PSI. Sit on the ATV or simulate rider weight for accurate alignment.

Step 2: Check Current Toe Measurement

1. Mark the center tread on each front tire with chalk.
2. Measure the distance between marks at the front of the tires.
3. Measure again at the rear.
4. Compare the values:
   • If front < rear → Toe-in
   • If front > rear → Toe-out

Most ATVs require slight toe-in (1/8″ or ~3 mm).

Step 3: Adjust Tie Rods

Loosen jam nuts and rotate the tie rod:

• Clockwise = Toe-in
• Counterclockwise = Toe-out

Adjust both sides evenly if the handlebars are centered.

Step 4: Re-Measure and Fine-Tune

Repeat the measurement process until desired toe is achieved.

Step 5: Tighten Everything

Recheck alignment after tightening jam nuts and performing a test ride.

⚙️ Why Rim Quality Affects Alignment

Warped or low-quality wheels can cause alignment issues even if tie rods are correctly set. Durable, precisely machined wheels help maintain consistent alignment.

✅ Why Choose BRS Wheels

• Shot-blasted for superior balance and roundness
• Electrophoretic coating resists rust and corrosion
• Precision engineering using 2D, 3D, and CAE development
• In-house lab testing for durability and fitment

BRS steel wheels are engineered to handle the rugged demands of ATV and off-road use while keeping your alignment in check.

🔄 How Often Should You Align ATV Wheels?

• After hitting rocks, logs, or curbs
• When changing wheels or suspension
• If steering pulls or feels unstable
• Every 6–12 months for general maintenance

📞 Contact BRS Auto Parts

Looking for durable steel wheels that hold alignment and withstand tough conditions?

Choose Ningbo BRS Auto Parts Co., Ltd. – a trusted leader in custom steel wheel manufacturing since 2002.

🌐 Website: https://brsrim.com
📧 Email: carrie@brsautoparts.com
📞 Phone / WhatsApp: 0086 19810666863

Ningbo BRS – Engineering trust into every turn.